Save to shopping list
Create a new shopping list

SPP-C Slave Bluetooth Module - Replacement for HC-05 / HC-06 - Universal Module for Arduino

SPP-C Slave Bluetooth Module - Replacement for HC-05 / HC-06 - Universal Module for Arduino
SPP-C Slave Bluetooth Module - Replacement for HC-05 / HC-06 - Universal Module for Arduino
SPP-C Slave Bluetooth Module - Replacement for HC-05 / HC-06 - Universal Module for Arduino
SPP-C Slave Bluetooth Module - Replacement for HC-05 / HC-06 - Universal Module for Arduino
SPP-C Slave Bluetooth Module - Replacement for HC-05 / HC-06 - Universal Module for Arduino
SPP-C Slave Bluetooth Module - Replacement for HC-05 / HC-06 - Universal Module for Arduino
9,67 €
/ pc
Easy return of this product within 14 days from the date of purchase for any reason
Free delivery for orders over 85,00 €

Bluetooth SPP-C module is a replacement for HC-05/06 modules. Universal Bluetooth communication module for Arduino, APM, AlexMos and MultiWifi, based on BEKEN BK3432 chip. The system works on the ARM968E-S processor, has 128KB of Flash memory, a built-in temperature sensor, and many different interfaces, such as: PWM, ADC, UART, I2C, SPI, GPIO, WDT, Timer.

The module allows you to connect any device with a phone, smartphone, tablet or other device wirelessly.

Product features

Standardized Bluetooth technology eliminates the problem of drivers and compatibility. The modules allow for communication up to 10m.
Serial communication through the UART port (pins RX, TX) - with a signal voltage of 3.3 V
Attention to the voltage of UART signals (pins RX, TX) (cannot be 5V) (use a voltage divider or a voltage converter when connecting to Arduino)
The module has soldered Goldpin headers that allow you to connect the module to the breadboard or connect using wires, jumpers, DuPont cables.
Transparent data transmission function - can be used with other devices
From the Bluetooth protocol:
V4.0 Low Energy (BLE)
Communication: UART (RX, TX)
MCU: ARM968
Program memory: 128KB Flash
RAM: 16KB
ADC: 10-bit, 8 channel
Low-power 2.4GHz Transceiver
Baud: 115,200
-Verification mode: none
DATA Bits: 8 bits
Stop Bits: 1 bit
Supply voltage: 3.6 V to 6 V connected to the VCC pin
UART communication outputs (RX / TX) work with a voltage of 3.3 V
Current consumption: approx. 50 mA, deep sleep 4uA
8nA transmission current
Class 2 - transmitter power max. + 4 dBm
Range: up to 10 m
Password for pairing: 1234
Dimensions: 38 x 16 mm

Starting the module

In order to start the module, connect supply voltage to the pin marked VCC.
The module will be detected by the computer as unknown chip or HC-06
To pair both devices, enter the password: 1234.
A virtual COM port will appear in the system, through which data can be sent using any terminal.

You can connect to the module:

Arduino boards - attention to the voltage of UART signals (cannot be 5V) (you can connect the Arduino Uno and others through a converter)
MultiWii controllers
APM controllers
AlexMos Gimbal Controllers

LED indicator description:

Green: power indicator
Red:
flashing means no connection
steady light indicates connect success

Product code
GL.003.098
Ask us a question about this product
If our description is not sufficient, please send us your questions about this product. We will reply as soon as possible. Data is processed in accordance with privacy policy. By submitting data, you accept our privacy policy.
Share your opinion with us and the others
Your opinion:
5/5
Add your own product photo:
pixelpixel