140 pcs 2-10 mm Heat Shrink Tube Sleeve Assortment Kit Box
PVC heat shrink tubing is a thin walled, low cost material with good electrical and mechanical properties. When exposed to heat exceeding 98 degrees for a few seconds, the specially formulated polyvinyl chloride material will rapidly shrink and uniformly conform to the shape of the object to be covered.
Technical data:
Material: Polyolefin
Voltage Rating: 1kV
Shrinkage Ratio: 2:1 (will shrink to 1/2 its supplied diameter)
Minimum Shrinkage Temp: +70C
Full Shrinkage Temp: +110C
Maximum Operating Temperature: -55C to +125C
Tensile strength: 10.4 MPa
Dielectric strength: 15 kV/mm
Flammability: Flame Retardant
The set contains 140 pcs heat shrink tubes packed in a handy compartment box.
Φ10 x 90mm - 15 pcs
Φ8 x 90mm - 15 pcs
Φ6 x 65mm - 10 pcs
Φ5 x 65mm - 10 pcs
Φ4 x 65mm - 15pcs
Φ3 x 65mm - 25 pcs
Φ2 x 30mm - 50 pcs
Plastic Storage Box
|
SIZE |
Before shrink(mm) |
Fully shrunk(mm) |
||
|
Inner Diameter |
Wall Thickness |
Inner Diameter |
Wall Thickness |
|
|
Φ1.0 |
1.5±0.2 |
0.18±0.08 |
≤0.6 |
0.36±0.06 |
|
Φ1.5 |
2.0±0.2 |
0.20±0.08 |
≤0.8 |
0.40±0.08 |
|
Φ2.0 |
2.5±0.2 |
0.20±0.08 |
≤1.00 |
0.42±0.08 |
|
Φ2.5 |
3.0±0.2 |
0.22±0.08 |
≤1.25 |
0.42±0.08 |
|
Φ3.0 |
3.5±0.3 |
0.25±0.10 |
≤1.5 |
0.46±0.08 |
|
Φ3.5 |
4.0±0.3 |
0.25±0.10 |
≤1.75 |
0.46±0.08 |
|
Φ4.0 |
4.5±0.3 |
0.25±0.10 |
≤2.0 |
0.48±0.08 |
|
Φ5.0 |
5.5±0.4 |
0.25±0.10 |
≤2.5 |
0.50±0.10 |
|
Φ6.0 |
6.5±0.4 |
0.28±0.12 |
≤3.0 |
0.56±0.10 |
|
Φ7.0 |
7.5±0.4 |
0.30±0.12 |
≤3.5 |
0.58±0.10 |
|
Φ8.0 |
8.5±0.5 |
0.30±0.12 |
≤4.0 |
0.60±0.10 |
|
Φ10 |
10.5±0.5 |
0.30±0.12 |
≤5.0 |
0.60±0.10 |
|
Φ11 |
11.5±0.5 |
0.30±0.12 |
≤5.5 |
0.60±0.10 |
|
Φ12 |
12.5±0.5 |
0.30±0.12 |
≤6.0 |
0.60±0.10 |
|
Φ13 |
13.5±0.5 |
0.36±0.12 |
≤6.5 |
0.65±0.12 |
|
Φ14 |
14.5±0.5 |
0.36±0.12 |
≤7.0 |
0.65±0.12 |
|
Φ15 |
15.5±0.5 |
0.36±0.12 |
≤7.5 |
0.65±0.12 |
|
Φ16 |
16.5±0.5 |
0.40±0.12 |
≤8.0 |
0.65±0.12 |
|
Φ18 |
19.0±0.5 |
0.40±0.15 |
≤9.0 |
0.70±0.12 |
|
Φ20 |
21.0±0.5 |
0.40±0.15 |
≤10.0 |
0.75±0.15 |
|
Φ22 |
23.0±0.5 |
0.40±0.15 |
≤11.0 |
0.80±0.15 |
|
Φ25 |
26.0±0.5 |
0.50±0.15 |
≤12.5 |
0.90±0.15 |
|
Φ28 |
29.0±0.5 |
0.50±0.15 |
≤14.0 |
0.95±0.15 |
|
Φ30 |
31.5±1.0 |
0.50±0.15 |
≤15.0 |
0.95±0.15 |
|
Φ35 |
36.5±1.0 |
0.50±0.15 |
≤17.5 |
1.00±0.20 |
|
Φ40 |
41.5±1.0 |
0.55±0.15 |
≤20.0 |
1.10±0.25 |
|
Φ50 |
≥50 |
0.55±0.15 |
≤26.0 |
1.20±0.25 |
|
Φ60 |
≥60 |
0.60±0.15 |
≤28.0 |
1.20±0.25 |
|
Φ70 |
≥70 |
0.65±0.15 |
≤30.0 |
1.20±0.25 |
|
Φ80 |
≥80 |
0.65±0.15 |
≤35.0 |
1.45±0.25 |
|
Φ90 |
≥90 |
0.65±0.15 |
≤40.0 |
1.45±0.25 |
|
Φ100 |
≥100 |
0.65±0.20 |
≤50.0 |
1.45±0.25 |
|
Φ120 |
≥120 |
0.65±0.20 |
≤60.0 |
1.45±0.25 |
|
Φ150 |
≥150 |
0.65±0.20 |
≤70.0 |
1.45±0.25 |