500V AC LED Voltmeter + 100A Ammeter, Red

RED LED INDICATOR AD101-22VAM NEPOWER - ALTERNATING VOLTAGE 50V - 500V AC AND ALTERNATING CURRENT 0 - 100A METER

Indicator screwed into a standard 22mm hole in the form of an AC / voltmeter built into the front of the indicator. The color of the light is matched to the color of the indicator. Power supply with alternating voltage in the range 50V to 500V max, is connected with wires directly to the X1 and X2 twisted terminals in the lower part of the indicator. The power supply is also the voltage indicated by the voltmeter.

The current consumption is non-invasive and without breaking the electric circuit for the duration of the measurement. It is enough to lead one wire, e.g. phase L, through the center of the measuring coil for the meter to display the value of the current flowing through this wire. 2 wires (phase with neutral) cannot be passed through the coil because the current will be 0A. The meter is designed to measure high currents up to 100A. The minimum measured current is 0.6A

Specification:

Control type: single color
Mounting hole: 22mm
Mounting depth: 38mm
Total height: 50mm
Backlight: LED display
Backlight color: red
Power and voltmeter range: 50V-500V AC
Current measurement range: 99.9A
The minimum value of the current: 0.6A
Power outputs: screw
Measurement leads: cable with connector + measuring coil
Body color: white
Coil external dimensions: 29x29x16 mm
Coil hole diameter: 12.5 mm
Tightness class: IP40
Standards: IEC947-5-1, EN60947-5-1