600 Pulses Optical Rotary Encoder - 2-Phase AB 5-24V - 6mm D-Shaft

Professional rotary encoder for measuring the rotational speed of an object, measuring angle, acceleration and length.
Suitable for cooperation with PLC controllers to measure displacement parameters.

The encoder is a two-phase (AB), 600-pulse/rev incremental optical rotary encoder, with an NPN open collector output. This type of output is with an internal pull-up resistor and can be connected directly to a microcontroller or PLC such as a 51 single or Mitsubishi PLC (PLC input to a switch connected to 0V should work). Standard with a 1.5 m cable.
Working voltage: DC5-24V
Maximum mechanical speed: 5000 rpm
Electrical response frequency: 20 K/sec
Integrated speed: 2000 rpm
Size: Encoder body size: φ38mm; D-shaft φ6 × 13mm; axial platform: high 5mm, φ20mm; mounting holes for: M3 screws
Three mounting holes on a 30mm diameter circle and three mounting holes on a 28mm circle.

Technical data:

600 P/R (Single-phase 600 pulses/R, two phases 4 frequency doubling to 2400 pulses)
Power supply: DC 5-24V
Shaft: D-profile 6x13mm / 0.23x0.51"
Dimensions: 38x35.5mm / 1.49x1.39"
Output: AB 2phase output rectangular orthogonal pulse, NPN open collector output type
Maximum mechanical speed: 5000 R/min
Response frequency: 0-20KHz
Cable length: 1.5 meter

Warning: AB 2 phase output must not be directly connected with VCC or output transistor can be burnt.

Connection:

Green=A phase,
White=B phase,
Red=VCC power
black=Ground