Car Reversing Camera in License Plate Frame
Reversing camera in the registration frame is an innovative solution for every driver, both beginners and even professional, it will significantly facilitate parking.
It is enough to replace the traditional frame with OUR MODEL to which the webcam is attached. The set includes a set of cables necessary for installation. The set does not include a monitor - you can connect any screen or monitor using a VIDEO cable. There are auxiliary lines over the camera image, which will greatly facilitate car parking.
The product has a 170-degree wide-angle lens and a vertical adjustment that increases the range and field of view. The camera has a dusk sensor. When it is already dark outside, the camera switches to night mode, thanks to 4 LEDs with a range of up to 3m!
INNOVATIVE ANTI-FOG TECHNOLOGY - the camera has been made in a technology that prevents its evaporation during unfavorable weather conditions, such as rain, snow. This helps keeping image at high quality all the time. The camera is resistant to weather conditions and can operate in temperatures from -30 ° C to + 80 ° C.
NIGHT MODE - the set works during the day and also at night. Thanks to 4 LEDs located on the camera, it can work in night mode. The range of LEDs is up to 3m, they are enough to illuminate the area.
TILT ANGLE ADJUSTMENT - the ability to set the camera at the right angle allows you to adjust it to your needs. The adjustment range is 45 degrees. When you buy OUR product, you will no longer have a problem with parking.
SAFE PARKING - the camera automatically turns on when you put the reverse gear. It allows a preview in the area of the rear bumper as well as a parking space in the range of 170 degrees. Using the camera while maneuvering the vehicle facilitates quick and safe parking, even in narrow, hard-to-reach places.
SPECIFICATION
housing color: black
power supply - 12V 0.1-0.2A
output voltage: 12V
power consumption: 3W
viewing angle - 170 ° (wide-angle lens)
working temperature - from -30 ° C to + 80 ° C
Image sensor: 1/4 "CMOS color
resistance class - IP68
resolution - 480x272
dusk sensor: YES
night mode - 4 LED lights
shock reduction: YES
color recording: YES
image type: mirror image
housing dimensions (length / width / height): 54 / 2.5 / 14cm
spacing for assembly: 47-48cm
cable length to the monitor: 6m
set weight: 360 g
weight with packaging: 510g
INCLUDED
frame with a camera
VIDEO cable + additional power cord
EASY INSTALLATION!
Connect the camera to the reversing lights, thanks to which, by shifting the reverse gear, the camera will automatically turn on.
1. Remove the frame that you currently have mounted on the car. Remove the license plate.
2. Place the board in a new frame.
3. Route the cables any way you want.
4. Attach the frame to the bumper.
5. Connect the black power cable to the car ground.
6. Connect the red wire to the plus of the reversing bulb.
7. Lead the video cables to the front of the car and connect to the monitor (the set does not include a monitor, but just connect any screen for the camera to work).