ESP32 DEVKIT V1 Power Expansion Board - for 30 Pin Boards

Adapter for 30-pin ESP32 boards. It allows you to conveniently use the board in your prototypes.

Compatible ESP32 boards:

ESP32 BOARD WITH ESP-WROOM-32 30-PIN WITH CP2102

Each of the pins of the ESP32 base board has been brought out to the Goldpin header.

An undoubted advantage of the adapter is its ability to supply power to both the ESP32 module and peripheral modules. There is a pair of power supplies (marked as V - voltage and G - ground) available at each pin.

The pins marked V can supply either 5V or 3.3V. This is selected with the JUMP jumper.

The adapter has convenient connectors that allow access to interfaces such as GPIO, UART, SPI, I2C and many others. Thanks to this, you can connect various sensors, displays, peripheral devices and expand the functionality of the ESP32 module without the need for a breadboard. By avoiding the “spiderweb” construction, you minimize the possibility of making a mistake.

The adapter can supply power from a variety of sources. There are 3 connectors:

DC connector, to which you supply voltage in the range of 6.5 - 16V
Micro USB connector
USB-C connector
The main power supply of the ESP32 module is supplied to its VIN pin. The presence of power to the adapter will be confirmed by the LED.

The module has a place for mounting holes. You can easily put it in a housing.