Glass Heatbed Tray 235x235x4 mm - Creality Ultrabase - Original

4mm thick glass with dimensions of 235x235mm. Leaves a smooth and even surface on the basis of the printout.

The toughened glass 3D printer pad is arguably the best option when it comes to durability and scratch resistance. An additional chemical coating increases the contact surface with the printout, which reduces the chance of the printout peeling off.

Durability: Many washers do not last a long time. Meanwhile, tempered glass rarely needs to be replaced as it hardly wears out. The additional coating is also very durable and increases the durability of the washer even more. This means you can enjoy consistently high-quality prints for a long time.

Cost: Due to its durability and little need for replacement, this pad will save you money (and time) in the long run.

Easy cleaning of the pad - a little alcohol or dishwashing liquid is enough.

Easy Removal: Nobody likes to use force to remove the printout from the print bed. There is not only a chance of breaking more fragile models, but also the risk of getting injured or damaging some element of the printer. Fortunately, glass surfaces are famous for their strong adhesion at high temperatures and for easy tearing of the printout at low temperatures.

Instructions for use:

1. Make sure the glass is clean,
2. Clean the heated table so that no particles would get between the glass and the table,
3. Secure the glass with the clips
4. Level the table
5. Print!

FAQ:

Q: How to clean the glass?

A: Washing with washing-up liquid and water or isopropyl alcohol / acetone is a good practice.

Q: Do I need to use glue?

A: It depends on what we print, some producers' PLA does not require it at all. We recommend that you check whether the material adheres without glue at the appropriate temperature of the table.

Technical data:

dimensions: 235 x 235mm
glass type: float
thickness 4mm
machine edge grinding

The glass tempering meets EN 12150 standard.