HC-06 Slave Bluetooth Module - Arduino
Bluetooth HC-06 HC06 - Universal Bluetootch communication module for Arduino, APM, AlexMos and MultiWii
The Bluetooth module allows you to connect any device with a phone, smartphone, tablet or other device wirelessly.
Product features
Standardized Bluetooth technology eliminates the problem of drivers and compatibility. The modules allow for communication up to 10m.
Connection through the UART port (pins RX, TX), serial - with a signal voltage of 3.3 V.
Watch out for the voltage of UART signals (pins RX, TX) (cannot be 5V) (a voltage divider or a voltage converter should be used when connecting to the Arduino).
The module has soldered Goldpin header connectors that allow you to connect the module to the breadboard or connect using wires.
The WAKEUP pins (switches the system into the AT command mode) and STATE (connected to the PIO1 status pin - pin 24) are led out in the form of holes, by default they do not have soldered connectors.
Transparent data transmission function - can be used with other devices with the Bluetooth v2.0 + EDR protocol
Communication: UART (RX, TX)
Baud: 115,200
-Verification mode: none
DATA Bits: 8 bits
Stop Bits: 1 bit
Supply voltage: 3.6 V to 6 V connected to the VCC pin
UART communication pins (RX / TX) work with a voltage of 3.3 V
Current consumption: approx. 50 mA
8nA transmission current
Class 2 - transmitter power max. + 4 dBm
Range: up to 10 m
Password for pairing: 1234
Dimensions: 38 x 16 mm
Starting the module
In order to start the module, connect the supply voltage to the pin marked VCC.
The module will be detected by the computer as unknown system or HC-06.
To pair both devices, enter the password: 1234.
A virtual COM port will appear in the system, through which data can be sent using any terminal.
You can connect to the module:
Arduino boards - watch out for UART signal voltages (cannot be 5V) (you can connect Arduino Uno and others through a converter)
MultiWii controllers
APM controllers
AlexMos Gimbal Controllers
LED indicator description:
Green: power indicator
Red:
flashing means no connection
continuous light indicates successful connection