MCU-200 FT200XD Full Speed USB to I2C Bridge

Specifications:

Up to 3.4MHz, high-speed mode, I2C supported.
Entire USB protocol handled on the chip, no USB specific firmware programming required.
Fully integrated 2048 byte multi-time-programmable (MTP) memory storing device descriptors and CBUS I/O configuration.
Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.
512 byte receive buffer and 512 bytes transmit.
USB Power Configurations supports bus-powered, self-powered and bus-powered with power switching.
Integrated +3.3V level converter for USB I/O
True 3.3V CMOS drive output and TTL input,
Operates down to 1V8 with external pull-ups, tolerant of 5V input
Configurable I/O pin output drive strength, 4mA(min) and 16mA(max)
Integrated power-on-reset circuit
Fully integrated AVCC supply filtering - no external filtering required
Internal 3V3/1V8 LDO regulators

Technical Data:

Chip: FT200XD
Operating Voltage: 5V
Interface: USB-A, I2C
Pin Number: 6 Pins