Miniature Digital Timer 5V 2s-2h - C005 - Delay Module

Digital Timer C005 is a trigger module with a duration of 2 seconds to 2 hours with a power supply of 5V. The module works in a very simple way, after applying a low GND signal to the trigger input pin, a low GND signal is fed to the output pin. The signal is present as long as the timer does not count down the time to the end, and the time is set by selecting the appropriate value of the RT resistor. There are also 2 configuration jumpers P1 and P2 in the module, jumpers act as multipliers of the time set by the resistor. P1 multiplies the set time x10 and P2 x100.

Technical data:

supply voltage: 2-5V
power consumption: 100uA when active (OUT is low), 1uA when sleeping
time ranges: 2s - 2h
max output pin load: 30uA
lifetime: minimum 100,000 cycles
dimensions: 12 x 12 mm

Our test:

RT - 10KOhm
Action time: 5 sec
P1 closed, action time: 42 sec
P2 closed, operating time: 5.58 min