PCF8591 - 8-bit Analog-to-Digital - AD/DA Converter Module - I2C

A AD/DA converter module using PCF8951 chip.
Supports external voltage input capture (input voltage range 0-5v)
Integrated photoresistor for environment acquisition through AD
Integrated thermistor, can capture the precise value of the ambient temperature through the AD
The five-module integrated 1 channel 0-5V voltage input acquisition (blue potentiometer to adjust the input voltage)
Power indicator LED
DA output indicator LED when DA output interface voltage reaches a certain value, the voltage the greater the light brightness;
Standard double-sided PCB, thickness 1.6mm, mounting through-holes with diameter of 3mm for convenient fix

Technical data:

Supply voltage: from 2.5 V to 6.0 V
A / D resolution: 8 - bit
Built-in oscillator
Sampling rate: depends on the speed of the I2C bus
Communication interface: I2C, address: 0x48
Built-in resistors: pulling-up data lines of the I2C bus
Possibility to work: in 4-channel mode or with two differential inputs
Tile sizes: 3.6 x 23 mm
Weight: 5 g

Pinout:

AOUT Analog output.
AIN0 Analog input 1.
AIN1 Analog input 2
AIN2 Analog input 3
AIN3 Analog input 4
SCL Clock line of the I2C interface, pulled up by a 10 kΩ resistor to VCC.
SDA Data line of the I2C interface, pulled up by a 10 kΩ resistor to VCC.
GND The ground of the system.
P4 Jumper connecting thermistor with AIN1 input.
P5 Jumper connecting photoresistor with AIN0 input.
P6 Jumper connecting the potentiometer with the AIN3 input.