Save to shopping list
Create a new shopping list

Pro Mini 328P - 5V / 16MHz - ATmega328P with Bootloader - Bascom AVR - Arduino Compatible

Pro Mini 328P - 5V / 16MHz - ATmega328P with Bootloader - Bascom AVR - Arduino Compatible
Pro Mini 328P - 5V / 16MHz - ATmega328P with Bootloader - Bascom AVR - Arduino Compatible
Pro Mini 328P - 5V / 16MHz - ATmega328P with Bootloader - Bascom AVR - Arduino Compatible
Pro Mini 328P - 5V / 16MHz - ATmega328P with Bootloader - Bascom AVR - Arduino Compatible
Pro Mini 328P - 5V / 16MHz - ATmega328P with Bootloader - Bascom AVR - Arduino Compatible
19,34 €
/ pc
Easy return of this product within 14 days from the date of purchase for any reason
Free delivery for orders over 85,00 €

Universal module with ATmega328P microcontroller. Can be used in many microprocessor projects. The board is compatible with Arduino PRO MINI 5V 16MHz project. The microcontroller has a bootloader loaded, so all you need to program it is a UART programmer.
Are you interested in electronics or programming? If so, Arduino is just for you because it links these two worlds! Thanks to microprocessors you will implement various projects!

Product features

Pro Mini, like UNO, is based on the popular Atmega328P microcontroller.
The board contains the ATmega328P chip, equipped with 14 digital inputs / outputs, 6 of which support the PWM signal (e.g. for servo control), and 8 analog inputs (for voltage measurement), but they can also act as additional digital pins (22 inputs / outputs in total).
Works with voltages of 5V.
It is clocked with a 16 MHz clock signal.
Switch for manual reset.
This version does not have soldered connectors - so the board can keep its small size.

Technical data

VCC supply voltage: 5V
RAW supply voltage: from 4 to 12V
Microcontroller: ATmega328P - 16 MHz
Ports - I / O pins: 14
Number of analog inputs: 8
Number of PWM outputs: 6
Serial interfaces: UART, SPI, I2C
External and internal interruptions
Protection against the flow of too much current
The module is made on a 0.8 mm thick laminate PCB
Weight less than 2 g.
2.54mm pin pitch (can be fit to a breadboard)
Dimensions: 33 x 18 mm
32kB flash memory
1kB EEPROM
1kB SRAM
2 timers / 8bit counters
1 timer / 16bit counter

Additional information

Power
If the supply voltage is higher than 5V, it should be connected to the RAW output, which is connected to the stabilizer (then the max voltage is 7-10V).
VCC is connected directly to the pins of the microcontroller, connecting a voltage higher than 5V may permanently damage the board.

Inputs / outputs
Arduino Pro has 14 digital inputs / outputs (I / O).
Each pin allows the consumption of current with a maximum intensity of 40mA, which allows direct connection of LEDs with resistors and control of other integrated circuits.
In addition to the standard I / O, some outputs also have special functions.

Programming
Creating and uploading software is possible thanks to the free environment provided by the manufacturer.
Arduino Pro does not have a chip that controls the USB interface. Therefore, the programming requires a UART <-> USB adapter.
For programming, you can use the PL2303 programmer or the AVR ISP programmer

Useful links

Arduino Pro Mini Home Page

Using the Arduino Pro Mini 3.3V

Arduino software - Arduino.cc

Product code
GL.002.707
Ask us a question about this product
If our description is not sufficient, please send us your questions about this product. We will reply as soon as possible. Data is processed in accordance with privacy policy. By submitting data, you accept our privacy policy.
Share your opinion with us and the others
Your opinion:
5/5
Add your own product photo:
pixelpixel