REX-C100 FK02-M*AN 0°C~400°C 230V AC Temperature Controller
precise temperature control
maintains the set temperature value at a constant level
use in many industrial devices
It maintains the set temperature value at a constant level adjusting it to the value read from the temperature sensor. The sensors can be of the K, J, R, S, B, E, T, N (JIS / IEC), PLII (NBS) W5Re / W26Re (ASTM), U, L (DIN), Pt100 (JIS / IEC), JPt100 (JIS) types.
REX-C100, depending on the connected thermocouple, can regulate the temperature in the range -199-1820 ° C.
The factory settings of the controller are SLH (max. Temp.) = 400 ° C and SL1 (K-type sensor) = 0000.
These parameters are controlled with built-in menu.
The controller has 3 LEDs that indicate:
ALM - exceeding the set temperature value,
ATU - disabling the PID function (autotuning),
OUT - switching on the heating element.
Model: REX-C100 FK02-M * AN
Sensor types: K, J, R, S, B, E, T, N (JIS / IEC), PLII (NBS) W5Re / W26Re (ASTM), U, L (DIN), Pt100 (JIS / IEC), JPt100 (JIS)
Supply voltage: 230V AC
Measurement accuracy: 0.5% or +/- 3 ° C
Alarm function: yes
Outer dimension: 48x48x100mm
Mounting dimension: 45x45 (depth 100mm)
Power consumption: 10VA
Working temperature: 0-50 ° C
Sampling cycle: 0.5s
Output load: 7A 250VAC / 10A 125VAC / 10A 125VDC / 10A 28VDC
Dual LED display for measured (PV) and set point (SV)
Most controllers like this one provides with a relay to drive your device power so it simply works like a temperature-controlled switch. Just mind the max amperage rating.