4.00-6.00 mm2 (12-10 AWG) Solder Splice - Quick Wire Connector with Tin - Heat Shrinking Tube with Solder - SST
Quick connector 4.00-6.00 mm2 made of heat-shrinkable material with tin is irreplaceable when we need to securely and permanently connect or repair wires.
In the center of the heat-shrinkable tubing there is a ring with tin which, when heated to a temperature of about 150 ° C, melts, thus joining the wires.
Inside these quick couplers there are 2 layers of glue, which strengthen and protect the connection of the cables against moisture.
No additional insulation is needed after the wires have been joined.
The coupler increases the safety and durability of the connection, ensuring quick assembly without the use of a press.
Technical data
wire range: 4.00 ~ 6.00mm2 (12-10 AWG)
tube length: about 40mm
inner diameter: approx. 5.8mm
Working temperature: -55°C ~ 125°C
Tin shrinkage and melting point: above 150°C
Shrink ratio: 3: 1
Insulating material: Polyolefn
Watch how to use the tubes:
Our test:
We took 1.50-2.50 mm2 sleeve (Product Code GL.002.724) and 14AWG copper wire.
We used hot air gun at 250°C.
It took a couple of minutes for the required amount of heat to transfer but we got good result and strong, reliable connection:
