SSD1306 OLED Display 0.91" Blue I2C 3-5V Arduino

OLED blue display with a diagonal of 0.91 "and a resolution of 128 x 32 px. The screen is based on the SSD106 controller, works with voltages of 3.3 V and 5 V, communicates via I2C ..

Specification:
OLED 0.96 "display with a resolution of 128x64 - blue
Very high contrast OLED display module.
Thanks to the OLED technology, the black elements on the display are perfectly black.
Modules for use in microprocessor systems AVR, Arduino, PIC, STM32 and etc.
Communication with the display via the I2C interface.
Technical data:
Size: 0.91 inch
Resolution: 128X32
Blue color
Viewing angle: greater than 160 degrees
Supported platforms: Arduino, 51, MSP430, STIM32 / 2, SCR
Low power consumption: 0.04 W during normal operation
Support wide voltage: 3.3V-5V DC
Working temperature: -30+80 degrees
Board dimensions: 38x12mm
Driver IC: SSD1306
Communication: IIC, only two I / O ports
Backlight: OLED light only, no backlight

Pinout:
VCC: 3.3-5V
GND: Ground
SCK: serial clock
SDA: serial data